Real time hauled amount.
Bill of quantities
Plan for cut/fill.
A pit resulting from the excavation of material for use in embankments.
An increase in volume of earthwork after excavation.
If value is set to 1 cut equals fill.
Area to process earthworks material.
Dumping ground for excess landfill.
Path from cut/fill area. Intersection is only needed between areas that are not located on main road line.
Milestones restrict the available time span for tasks. A milestone marks the end of a piece of work or phase of the project. They are often fixed dates with or important dates that you need to be aware of. Set new milestone by setting "Milestone" as task type.
Units used in earthworks are usually for fills compacted cubic meter/yard (ccm/ccy)and for cuts bank cubic meter/yard (bcm/bcy). Haul unit loose cubic/meter/yard (lcm/lcy) is used for haul resources. Other units can be used for other tasks. Quantities are always bound with tasks in MAGNET Project.
Quantity type determines suitability of the material in question (cut/fill). Other quantity types can include borrow, disposal or backfill.
Resource type defines the production rate for a quantity type (units/hour).
A decrease in volume of earthwork after deposition and compaction.
Local stockpile can be used for temporary storing of excess material to be used in later landfills during a project. Local stockpiles are needed if cuts and fills within internal mass haul are scheduled to occur during different period of time.
Usage breaks are temporary road blocks that might occur on construction site. Usage breaks are located on road lines and prevent hauls through them. Typical usage breaks